Aerostar 2WD V6-3.0L VIN U (1997)
Shift Solenoid: Service and Repair
Internal Harness Replacement
REMOVAL
NOTE: The main control assembly does not need to be removed.
1. Remove fluid, pan, gasket and filter. Discard gasket.
2. Disconnect the solenoid connectors from the solenoids by carefully pulling downward and wiggling side to side.
3. Remove the TCC, CCS, SS2 and EPC solenoid clamp screws.
CAUTION: The TCC solenoid may pop out of its bore. The converter modulator valve may come out after the TCC solenoid clamp has been
removed. This may damage the solenoid or converter modulator valve.
