Aerostar AWD V6-183 3.0L (1991)
Blower Motor Switch: Service and Repair
INSTRUMENT PANEL MOUNTED
1.
Remove heater control assembly as outlined previously, but do not disconnect control cables from assembly.
2.
Using a small screwdriver, gently pry knob from blower switch.
3.
Working from back of control assembly, disconnect blower switch electrical connector.
4.
Remove blower switch to control assembly attaching screws, then the blower switch.
5.
Reverse procedure to install.
Fig. 9 Rear Blower Switch
AUXILIARY HEATER & A/C REAR MOUNTED
1.
Disconnect battery ground cable.
2.
Using a small screwdriver, gently pry knob from blower switch, Fig. 11.