Aerostar AWD V6-183 3.0L (1991)
Volt Meter Gauge: Service and Repair
Removal
1. Remove instrument cluster.
2. Remove lens/mask assembly from cluster by removing five screws (three across top and two in each bottom corner of cluster).
3. Remove three screws from back of module to be removed, and lift flex circuit off locator pins. Remove module from cluster.
Installation
1. Place module in cluster, align flex circuit on locator pins, and fasten module in place with three screws.
2. Remove any fingerprints or dust from the module displays with a lint free tissue and alcohol, if necessary.
3. Fasten lens/mask assembly to cluster with five screws.
4. Install instrument cluster.
5. Check that cluster lens is free of fingerprints and dust.