ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Recall - Throttle Position Sensor Replacement|Page 2841 > < Recall - Throttle Position Sensor Replacement|Page 2839
Page 3
background image

Service Part Number - F1DZ-9B989-BA
Kit Contents

AFFECTED VEHICLES:
1990 Model Tempo/Topaz and 1991 Model Tempo/Topaz Built before November 26, 1990 - 2.3L Engine

INSPECTION

1.

Inspect throttle position (TP) sensor. If TP sensor part number is E83F-9B889-AA and does not have a yellow dot, replace TP sensor using service
part kit F1DZ-9B989-BA.

2.

Remove and discard original TP sensor retaining screws and install new TP sensor screws. Tighten new TP sensor retaining screws to 2.8-3.8 N-m
(25-33 lb.in.).

3.

If part number is not E83F-9B989-AA or the TP sensor has a yellow dot, it is NOT necessary to replace TP sensor.

AUTHORIZED MODIFICATIONS DECAL

The preprinted Authorized Modifications Decal shown is provided in the parts kit.

^

Insert your P & A Code and date and attach the Authorized Modifications Decal to a clean surface on the fan shroud.

^

Place the clear overlay on the decal.

THROTTLE POSITION SENSOR 
REPLACEMENT KIT "B"
INSTALLATION INSTRUCTIONS 
EMISSIONS RECALL 91E09

Recall - Throttle Position Sensor Replacement|Page 2841 > < Recall - Throttle Position Sensor Replacement|Page 2839