Aerostar AWD V6-183 3.0L (1991)
4. Tighten hub retainer nut to 230-283 N-m (170-210 ft-lb).
5. Install the inboard flange of the halfshaft to the differential output flange so the index mark on the halfshaft is in line with the index mark on the
differential output flange. This assures original halfshaft position.
6. Install the flange bolts and tighten bolts to 30-40 N-m (22-29 ft-lb).
7. Install wheel and tire assembly and lower the vehicle.
8. Tighten wheel nuts to 135 N-m (100 ft-lb).
