ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Paint - Codes/Cross References|Page 3860 > < Paint - Codes/Cross References|Page 3858
Page 1
background image

Paint: By Symptom

Technical Service Bulletin # 95224

Date: 951106

Paint - Chipping at License Plate

Article No.
95-22-4

11/06/95

PAINT - CHIPPING AT LICENSE PLATE GARNISH - VEHICLES BUILT THROUGH 4/1/95

FORD: 
1994-95 ASPIRE

ISSUE: 
The paint may chip at the license plate garnish. This may be caused by contact of the garnish to the body while driving and/or when closing the liftgate.

ACTION: 
Attach rubber spacers on the inside lower edge of the license plate garnish. This will maintain clearance between the license plate garnish and the
liftgate. Refer to the following Service Procedure for details

SERVICE PROCEDURE

1.

Cut two (2) lengths of 7/32" vacuum hose, or equivalent, 3 mm long. Refer to Figure 1.

NOTE

MAKE SURE WHEN CUTTING THE HOSE THAT BOTH THE ENDS ARE PARALLEL.

2.

Remove the four (4) bolts that hold the license plate garnish to the liftgate.

Paint - Codes/Cross References|Page 3860 > < Paint - Codes/Cross References|Page 3858