Aspire L4-81 1.3L SOHC (1994)
Trunk / Liftgate: All Technical Service Bulletins
Paint - Chipping at License Plate
Article No.
95-22-4
11/06/95
PAINT - CHIPPING AT LICENSE PLATE GARNISH - VEHICLES BUILT THROUGH 4/1/95
FORD:
1994-95 ASPIRE
ISSUE:
The paint may chip at the license plate garnish. This may be caused by contact of the garnish to the body while driving and/or when closing the liftgate.
ACTION:
Attach rubber spacers on the inside lower edge of the license plate garnish. This will maintain clearance between the license plate garnish and the
liftgate. Refer to the following Service Procedure for details
SERVICE PROCEDURE
1.
Cut two (2) lengths of 7/32" vacuum hose, or equivalent, 3 mm long. Refer to Figure 1.
NOTE:
MAKE SURE WHEN CUTTING THE HOSE THAT BOTH THE ENDS ARE PARALLEL.
2.
Remove the four (4) bolts that hold the license plate garnish to the liftgate.
