Aspire L4-81 1.3L SOHC (1994)
Fuel Pressure Release: Service and Repair
WARNING: Do not smoke, carry lighted tobacco or open flame of any type when working on or near any fuel related component. Highly
flammable mixtures are always present and may be ignited, resulting in possible personal injury.
CAUTION: Fuel supply lines will remain pressurized for long periods of time after engine shut down. This pressure must be relieved before
servicing of the fuel system is begun. A valve is provided on the throttle body for this purpose. Remove the air cleaner and relieve system
pressure by using Rotunda pressure gauge tool T80L-9974-A or equivalent and drain the system through the drain tube.
1. Start the engine.
Fuel Pump Relay
2. To stop the fuel pump, remove the fuel pump relay located behind the LH side of the instrument panel.
3. After the engine stalls, turn off the ignition.
4. Re-install the fuel pump relay.
NOTE: Use a rag as protection from the fuel spray when disconnecting the hoses. Plug the hoses after disconnection.
