Aspire L4-81 1.3L SOHC (1994)
Tube
4. Loosen the clamp and remove the air cleaner intake tube from the MAF sensor.
5. Disconnect the vacuum hose.
6. Remove the upper engine air cleaner.
Mass Air Flow Sensor
7. Remove the two MAF sensor bolts and the MAF sensor.
INSTALLATION
1. Install the MAF sensor and the two sensor bolts. Tighten the bolts to 8-10 Nm (71-88 lb in).
2. Install the upper engine air cleaner.
3. Connect the vacuum hose.
4. Install the air cleaner tube to the MAF sensor and tighten the air cleaner holding clamp.
5. Connect the IAT sensor electrical connector.
6. Connect the MAF sensor electrical connector.
7. Connect the battery ground cable.
