ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Relays and Modules - Computers and Control Systems > < Component Tests
Page 1
background image

Power Steering Pressure Switch: Service and Repair

REMOVAL

1. Disconnect the battery ground cable.

2. Disconnect the Power Steering Pressure (PSP) switch electrical connector.
3. Remove the PSP switch.

INSTALLATION

1. Install the PSP switch and tighten to 25-29 Nm (18-22 lb ft).
2. Connect the electrical connector to the PSP switch.
3. Connect the battery ground cable.

Relays and Modules - Computers and Control Systems > < Component Tests