Aspire L4-81 1.3L SOHC (1994)
Throttle Cable/Linkage: Adjustments
Free Play
1.
Adjust the idle speed to specification. Refer to Fuel Delivery and Air Induction/Mechanical Specifications/Base Idle Speed.
Accelerator Pedal And Linkage Components
2.
Measure the free play at the accelerator pedal and shaft (9725).
3.
Free play should be 0.04-0.12 inch (1-3mm). If necessary, loosen the locknut and adjust at the accelerator cable bracket, located near the throttle
body (9E926).
4.
Tighten the locknut after proper free play is achieved.
5.
Adjust the wide open throttle position. Refer to Adjustments/Wide-Open Throttle. See: Wide-Open Throttle
