Aspire L4-81 1.3L SOHC (1994)
Child Seat Tether Attachment: Description and Operation
WARNING:
-
WHEN USING ANY INFANT OR CHILD RESTRAINT SYSTEM, IT IS IMPORTANT THAT YOU FOLLOW THE INSTRUCTIONS
PROVIDED BY THE MANUFACTURER CONCERNING ITS INSTALLATION AND USE. FAILURE TO FOLLOW EACH OF THE
RESTRAINT MANUFACTURER'S INSTRUCTIONS CAN RESULT IN A CHILD STRIKING THE VEHICLE'S INTERIOR DURING
A SUDDEN STOP OR COLLISION.
-
IT IS IMPORTANT THAT THE BOLT/ANCHOR BE SECURELY TIGHTENED TO SPECIFICATION. OTHERWISE, THE CHILD
SAFETY SEAT MAY NOT BE PROPERLY SECURED AND THE CHILD COULD BE INJURED IN CASE OF A SUDDEN STOP OR
ACCIDENT.
TETHER ANCHOR HARDWARE
If tether anchorage hardware is required for the child safety seat but is not provided by the child safety seat manufacturer, tether anchor hardware kits
can be obtained at no charge from any Ford dealer. Attachment holes at each rear seating position have been provided in all vehicles.
Some child safety seats provide a tether strap which goes over the back of the vehicle seat and attaches to an anchorage in the panel behind the rear
seat.
If a tethered safety seat is installed in the front seat, the tether strap should be hooked to the rear seat lap belt tongue or the webbing of the buckled
rear seat lap belt behind the child safety seat. Attachment holes (at each rear seating position) have been provided to attach the tether anchor hardware
kit.
CANADIAN VEHICLES ONLY
All vehicles built for sale in Canada include a tether anchor hardware kit for use with Canadian Child Safety Seats.
