Aspire L4-81 1.3L SOHC (1994)
Alignment: Specifications
Front Caster Angle
Limits ............................................................................................................................................................................................ +1 5/12 to +2 5/12°
Desired ............................................................................................................................................................................................................. +1 2/3°
Front Camber Angle
Limits .............................................................................................................................................................................................. + 1/12 to +1 7/12°
Desired ............................................................................................................................................................................................................... + 5/6°
Front Toe-In .................................................................................................................................................................................................... 0.2 to 0.26 in
Kingpin Inclination ........................................................................................................................................................................................................ 14°
Ball Joint Wear .............................................................................................................................................................................................................. [01]
Rear Camber
Limits ......................................................................................................................................................................................................... -1 to + 1/2°
Desired .................................................................................................................................................................................................................. -1/4°
Rear Toe-In ........................................................................................................................................................................................................ 0 to 0.24 in
[01] -- Refer to ball joint inspection procedure. See: Suspension/Ball Joint/Testing and Inspection
