Aspire L4-81 1.3L SOHC (1994)
NOTE:
DO NOT LOSE THE CHECK BALL AND DETENT SPRING LOCATED IN THE SLOTTED HOLE OR THE THROTTLE CONTROL VALVE
ROD (FIGURE 3).
4.
Remove the nine (9) main control valve body bolts securing the main control valve body and filter (Figure 2). Remove the main control valve body
from the transaxle.
5.
Thoroughly clean the oil pan gasket residue from the transaxle case and oil pan.
NOTE:
USE PETROLEUM JELLY, OR EQUIVALENT, TO HOLD THE ASSEMBLY IN PLACE.
6.
Install the revised Check Ball and Seat Assembly Kit (F4BZ-7K037-AA) in the drain back hole (Figure 3). Install remaining kit contents in the