Aspire L4-81 1.3L SOHC (1994)
Input Shaft: All Technical Service Bulletins
M/T - MTX Click/Clunk/Rattle Noise in Reverse
Article No.
96-22-7
10/21/96
^
NOISE - "CLICK, CLUNK, RATTLE" - MTX TRANSAXLE REVERSE GEAR
^
TRANSAXLE - MTX - "CLICK, CLUNK, RATTLE" IN REVERSE GEAR
FORD:
1994-97 ASPIRE
ISSUE:
A "clicking, clunking, or rattling" noise may be caused by a shift lever that is not fully engaged in reverse gear, resulting in damaged gears. These noises
are most noticeable when coasting rearward with the clutch disengaged.
ACTION:
Install a new input shaft, reverse idler gear and reverse gear. Refer to the appropriate year Aspire Service Manual, Section 07-03, for service details.
CAUTION:
MAKE SURE THE CUSTOMER KNOWS THAT WHEN SHIFTING INTO REVERSE GEAR, THE CLUTCH MUST BE FULLY
DISENGAGED WITH THE VEHICLE AT A COMPLETE STOP AND THE SHIFT LEVER FULLY ENGAGED IN REVERSE GEAR TO
AVOID DAMAGING THE MTX TRANSAXLE.
PART NUMBER
PART NAME
E8BZ-7017-B
Input Shaft
E8BZ-7141-A
Reverse Idler Gear
E8BZ-7K013-A
Reverse Gear
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
962207A
Remove - Install
5.3 Hrs.
Transaxle, Repair As
Outlined
DEALER CODING
CONDITION
BASIC PART NO.
CODE
7141
56
OASIS CODES: 505000, 597997