ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Front Door Glass - Binds or Comes Out of Track|Page 4201 > < Front Door Glass - Binds or Comes Out of Track|Page 4199
Page 3
background image

4.

If glass is off track or if customer states it has fallen off, inspect glass and verify it is free of scratches or damage.

TRACK ADJUSTMENT REPAIR

1.

Replace the regulator if broken or the tabs show signs of cracking per the 1994 Aspire Service Manual, Section 01-11-8.

2.

Replace the window glass if scratched or damaged in any way.

NOTE:

WHEN INSTALLING THE GLASS TO REGULATOR ATTACHING BOLTS, HAND TIGHTEN ONLY.

3.

Roll the window to the full up position.

4.

Measure position of front track at the lower mounting bracket. The bracket can be located through the speaker opening (Figure 2). To measure:

^

Rest a steel rule on the top of the bracket, against the track and hold it horizontal.

^

Push the rule forward until it contacts the door at the front edge.

^

The dimension is from the inside surface of the front door to the front edge of the track (Figure 2). The specification is 108-110 mm.

NOTE:

WHEN A GLASS FALLS OUT AT THE LOWER POSITION, THE TRACK MAY BE POSITIONED TOO FAR FORWARD, 108 mm OR LESS.
IF THE WINDOW HAS HIGH ROLL UP EFFORTS, THE TRACK MAY BE POSITIONED TOO FAR REARWARD, 110 mm OR MORE,
CAUSING BINDING OF THE GLASS.

Front Door Glass - Binds or Comes Out of Track|Page 4201 > < Front Door Glass - Binds or Comes Out of Track|Page 4199