Aspire L4-81 1.3L SOHC (1994)
5.
To adjust the position of the track rearward, use a pry bar, resting it on the lower support bracket with the tip positioned behind the track and the
pry bar protruding through the speaker opening (Figure 3).
6.
Adjust the track to meet the 108-110 mm dimension.
NOTE:
ADJUSTING THE TRACK SLIGHTLY BEYOND THE DESIRED POSITION MAY BE REQUIRED TO ACCOMMODATE SPRING BACK
OF THE TRACK.
7.
To adjust the position of the track forward, reach through the opening, rear of the speaker opening with your hand and grasp the track at the
bracket area. Push forward on the track to meet the 108-110 mm dimension (Figure 4).
NOTE:
ADJUSTING THE TRACK SLIGHTLY BEYOND THE DESIRED POSITION MAY BE REQUIRED TO ACCOMMODATE SPRING BACK
OF THE TRACK.
8.
Measure the position of the track and readjust as needed.
