Bronco L6-300 4.9L VIN Y 1-bbl (1983)
Transmission Mount: Customer Interest
A/T Mount - Vehicle Shakes Idling in Gear
Article No. 83-4-17
IDLE SHAKE - (4x4) VEHICLES WITH C6 AUTOMATIC TRANSMISSIONS AND 4.9L ENGINES
LIGHT TRUCKS 1983 BRONCO, F150
An idle shake in gear may be caused by incorrect transmission mounts. The mounts and engine idle speed should be verified before performing any other
service actions.
To identify original parts, verify the insulator part number molded on the side of the rubber pucks, and the color code. If the insulators are color coded
black with PN (E0TA-6A037-AB) (Upper) and PN (E0TA-6A061- CB) (Lower), molded on the side, replace the insulators with PN (E1TZ-6E039-A)
(Upper) and PN (E1TZ- 6E039-B) (Lower) identified with white color code. These new insulators have part numbers (E0TA- 6A037-BA) (Upper) and
(E0TA-6A061-DA) (Lower) molded on the side of the rubber pucks.
If the insulators need to be replaced, the two lower metal inserts PN (D4TZ-1000157-A) must also be replaced.
PART NUMBER
PART NAME
CLASS
E1TZ-6E039-A
Mount - Upper
A
E1TZ-6E039-B
Mount - Lower
A
D4TZ-1000157-A
Retainer
B
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION/TIME: Refer to the Labor Time Standards Manual for applicable operation and time.
DLR. CODING: Basic Part No. 6E039 Code: 38
