Bronco Full Size L6-300 4.9L (1987)
3.
For single wheel usage, look up the pressure in the proper chart which will meet the needed capacity, Figure 3.
4.
Check the tire side wall label to see if it permits inflation to that pressure. If lower load range tires were installed (i.e., C vs. D or E), the tires may
not have the needed capability.
5.
Divide the value found in Step 2 by 2 again to obtain individual tire requirements for dual rear wheels.
6.
Using a dual wheel inflation pressure chart, Figure 3, determine correct pressure to achieve adequate load capacities.
7.
Consult the local tire outlet or the tire manufacturer's home office about tires not shown in the tables.
OTHER APPLICABLE ARTICLES:
87-10-11
WARRANTY STATUS:
INFORMATION ONLY
OASIS CODES:
3300
