ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Recall - Fuel Vapor Hose Replacement|Page 3285 > < Recall - Fuel Vapor Hose Replacement|Page 3283
Page 3
background image

AFT-OF-AXLE TANKS

Fuel System Pressure Relief

CAUTION:

Fuel supply lines on EFI engines will remain pressurized for some period of time after the engine is shut off. This residual pressure must be relieved
before servicing of the fuel system is begun.

Relieve the residual pressure in the fuel system as follows:

^

Disconnect the inertia switch.

^

Crank the engine for 15 to 20 seconds to relieve pressure.

Replace Fuel Vapor Hose
1.

Drain the fuel from the tank.

2.

Raise the vehicle on a hoist and position the spare tire assembly out of the way.

3.

Position a suitable jack under the fuel tank and remove the 4 nuts and bolts that secure the fuel tank straps to the frame.

Recall - Fuel Vapor Hose Replacement|Page 3285 > < Recall - Fuel Vapor Hose Replacement|Page 3283