Bronco Full Size L6-300 4.9L (1987)
Axle Bearing: Service and Repair
Ford Integral Carrier Type Axle
1.
Remove axle shaft as outlined in ``Axle Shaft, Replace''.
2.
Insert tool T83T-1226-A for models with 8.8 inch ring gear, or tool T85T-1225-AH for models with 10.25 inch ring gear, and tool T50T-100-A
into axle bore so tangs on tool engage bearing outer race. Remove bearing and seal as an assembly.
3.
Install new bearing using tool T83T-1225-B on models with 8.8 inch ring gear, or tool T80T-4000-W on models with 10.25 inch ring gear, and
new seal using tool T83T-1175-A on models with 8.8 inch ring gear, or tool T80T-4000-Y on models with 10.25 inch ring gear. Pack lips of seal
with C1AZ-19590-B or equivalent.
4.
Reinstall axle.
