ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fuel Tank > < Fuel System Spring Lock Fitting - Proper Assembly|Page 3981
Page 1
background image

Fuel Supply Line: All Technical Service Bulletins
Fuel Line - Disconnect Service Tool

Article No. 85-16-25

FUEL LINE DISCONNECT SERVICE

TOOL - REWORK FOR 5.0L EFI TRUCKS

LIGHT TRUCK 1985-86 F-SERIES, BRONCO

CONDITION

1.

The outside diameter of the fuel rail (9D280) crossover line for 1985-1/2 is larger. A slight rework of the disconnect service tool is required.

2.

For l986 the chassis to engine fuel line connection is changed. This necessitates a slight rework of a similar service tool.

CORRECTION

Figure 15 - Disconnect Service Tool

1.

Rework a T81P-19623-G1-3/8 inch tool per Figure 15 to a 5/8 inch opening. The plastic is easily worked with a rat tail file.

NOTE:

Only the rear edge/opening is enlarged. After rework, spray paint the tool yellow and mark/identify it "1985-1/2 Truck 5.0L Gas Line Only".

2.

Rework a T81P-19623-G2-1/2 inch tool per Figure 15 to a 5/8 inch opening (rear same as above). After rework, spray paint the tool white and
mark/ identify it "1985-86 Truck 5.0L Gas Line Only".

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"

Fuel Tank > < Fuel System Spring Lock Fitting - Proper Assembly|Page 3981