ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine - Rough Idle/Black Smoke|Page 2899 > < Engine - Misfire/Buck/Jerk
Page 1
background image

Engine Control Module: All Technical Service Bulletins
Engine - Rough Idle/Black Smoke

Article No. 86-6-32

IDLE - ROUGH - BLACK SMOKE (2.9L) - MANUAL TRANSMISSION

LIGHT TRUCK 1986 RANGER, BRONCO II

Some of the subject vehicles may exhibit a rich fuel mixture condition. As a result, the customer may be concerned about a rough idle and/or black
smoke (emitting from tailpipe) condition.

To correct the condition, the following procedure is recommended.

1.

Using Rotunda EEC IV Monitor 007-00018 or Super Star Tester 007-00019, perform EEC IV Self-Test. Verify and service all codes as directed
by the 1986 Engine/Emission Diagnosis Shop Manual, Volume H.

2.

If after performing Step 1 and service code 42 remains during key-on engine running, proceed to Step 3.

3.

During self-test, if code 42 occurs (key-on engine running) verify EEC processor module part number.

4.

If vehicle is equipped with one of the modules with part number E6TF-12A650-CB, E6TF-12A650-LA or E6TF-12A650-MA, replace with
corresponding modules on the following application chart.

DELETE

ADD

EEC Processsor Module   

EEC Processor Module   

Applications

E6TF-12A650-CB

E6TZ-12A650-CC 49S Ranger/Bronco II M/T

E6TF-12A650-LA

E6TZ-12A650-LB 49S Chassis Cab M/T

E6TF-12A650-MA

E6TZ-12A650-MC Calif. Ranger/Bronco II

Chassis Cab M/T

NOTE:

If the vehicle is equipped with any of the EEC processor modules listed in the "ADD" column, DO NOT CHANGE due to warranty
implications.

5.

With a Sharpie No. 49 pen, update the engine calibration number from R00 level to R10 level.

Obtain an Authorized Modifications Decal and list the date, dealer number, and summary of alterations performed. Select a prominent place adjacent to
the Vehicle Emission Control Information Decal suitable for installing the Authorized Modifications Decal. Clean the area, install the decal, and cover it
with a clear plastic decal shield.

PART NUMBER

PART NAME

CLASS

E6TZ-12A650-CC

EEC Processor Module

R

E6TZ-12A650-LB

EEC Processor Module

R

E6TZ-12A650-MC

EEC Processor Module

R

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: 12650D - Verify concern.
TIME:

0.5 Hr.

OPERATION: 12650D6 - Replace processor.

Engine - Rough Idle/Black Smoke|Page 2899 > < Engine - Misfire/Buck/Jerk