Bronco II 2WD V6-177 2.9L (1986)
Fluid Pump: All Technical Service Bulletins
A/T - Front Pump Support Crescent Casting Appearance
Article No. 85-13-16
TRANSMISSION - AUTOMATIC - A4LD/C3 - FRONT PUMP SUPPORT CRESCENT CASTING APPEARANCE
LIGHT TRUCK 1983-86 RANGER, BRONCO II, AEROSTAR
Field reports indicate that some front pump supports (7A103) are being replaced due to the rough appearance of the crescent casting.
Figure 34 - Crescent Casting
View A in Figure 34 identifies the area of concern on the crescent casting. The rough appearance of the casting is intentional and is not a flaw.
The function of the pump is not affected and it should not be replaced due to this appearance.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"
