Bronco II 2WD V6-177 2.9L (1986)
Shifter M/T: All Technical Service Bulletins
M/T - Hard Shift/No Shift Condition
Article No. 88-8-19
TRANSMISSION - TK 5 (MAZDA 5-SPEED) - HARD OR NO SHIFT CONDITION
LIGHT TRUCK:
1986-87 RANGER
ISSUE:
A transmission that is hard to shift or a transmission that will not shift may be caused by a broken shift lever housing. The broken shift lever
housing allows the shift lever shaft to come loose from the transmission which results in the hard or no shift condition.
ACTION:
To correct this, install a new shift lever assembly with four (4) new attaching bolts. Torque the bolts to 7- 10 ft.lbs. (9-13 N-m). Refer to
the appropriate Ranger/Bronco II Shop Manual, Section 16-20 for detailed service procedures.
NOTE:
THE NEW SHIFT LEVER ASSEMBLY IS SERVICED IN A "NATURAL" BEIGE COLOR TO DISTINGUISH IT FROM PREVIOUS
LEVEL ASSEMBLIES.
PART NUMBER
PART NAME
CLASS
N801571-S100
Bolts - Package of 6
S
E7TZ-7210-R
Shift Lever Assembly
B
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Eligible Under Basic Warranty Coverage
OPERATION: 880819A
TIME:
0.6 Hr.
DLR. CODING:
Basic Part No. 7210
Condition Code: 01