Bronco II 4WD V6-171 2.8L (1985)
3. Install the outer pad, making sure the torque buttons on the pad are seated solidly in the matching holes in the caliper.
4. Install the caliper on the spindle, making sure the mounting surfaces are free of dirt and lubricate the caliper grooves with disc brake caliper
grease. See Caliper/Service and Repair See: Brake Caliper/Service and Repair
5. Install wheel and tire assembly.
6. Lower the vehicle, check the brake fluid level and fill as necessary. Check brakes for proper operation.
WARNING: Before moving vehicle, pump brake pedal several times to be sure it is firm. Do not move vehicle until a firm pedal is
obtained.
