Bronco II 4WD V6-171 2.8L (1985)
Wheel Cylinder: Service and Repair
Installation
For additional information see Notes, Warnings, and Hints.
Wheel Cylinder And Backing Plate
1. Place the brake cylinder on the backing plate and install the retaining bolts and lockwashers.
2. Connect the brake line to the brake cylinder.
Wheel Cylinder Connecting Links
3. Install the brake shoes and the connecting links (if equipped).
4. Install the drum.
5. Install the wheel and tire assembly.
6. Adjust the brakes and perform system brake bleeding procedures.
