Bronco II 4WD V6-171 2.8L (1985)
Fig. 25 Front stabilizer bar replacement. 1986---87 Bronco II 4 X 2
1986-87 BRONCO II 4 X 2
1.
Remove stabilizer link assembly nut and washer, then disconnect stabilizer link assembly from front I-beam axle, Fig. 25.
2.
Remove stabilizer bar attaching bolts, then the stabilizer bar retainers from the stabilizer bar assembly.
3.
Remove stabilizer bar from vehicle.
4.
Reverse procedure to install.
