ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Parking Brake Control - Vehicles Built From: 03-2007, Vehicles With: Center Armrest > < Parking Brake Cable Adjustment

C-MAX 2003.75 (06.2003-)

Parking Brake and Actuation - Parking Brake Control C-MAX 2003.75 (06/2003-)
Removal and Installation

  1. Remove the floor console. For additional information, refer to Section  501-12 Instrument Panel and Console.
  1. Release the parking brake.

  1. Disconnect the parking brake control switch electrical connector.

4. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Parking brake cable adjustment nut
2
-
Parking brake control retaining bolts
3
-
Parking brake control
See Removal Detail
See Installation Detail

5. To install, reverse the removal procedure.

  1. Adjust the parking brake cable.
    For additional information, refer to Parking Brake Cable Adjustment in this section.

Removal Details

Item 3 : Parking brake control
  1. NOTE:
    NOTE:Make a note of the position of the parking brake cable retaining tab, to aid installation.
    NOTE:
    NOTE:The parking brake cable retaining tab must be positioned away from the parking brake cable, to aid removal.
    Position the parking brake cable retaining tab away from the parking brake cable.

Installation Details

Item 3 : Parking brake control
  1. CAUTION:
    CAUTION:When repositioning the parking brake cable retaining tab, make sure that the parking brake cable retaining tab does not clamp the parking brake cable.
    NOTE:
    NOTE:Make sure that the parking brake cable is correctly located in the parking brake control.
    Reposition the parking brake cable retaining tab.

Parking Brake Control - Vehicles Built From: 03-2007, Vehicles With: Center Armrest > < Parking Brake Cable Adjustment