Ford Workshop Service and Repair Manuals > C-MAX 2003.75 (06.2003-) > Mechanical Repairs | 2 Chassis | 206 Brake System | 206-05 Parking Brake and Actuation | Description and Operation | Diagnosis and Testing | General Procedures | Removal and Installation

Parking Brake and Actuation - Parking Brake Release Actuator

C-MAX 2003.75 (06/2003-)

Removal and Installation

Remove the floor console.
For additional information, refer to: Floor Console - Vehicles With: Electronic Parking Brake (501-12 Instrument Panel and Console, Removal and Installation).

Detach the parking brake release actuator T-bar from the parking brake release actuator.
1. Slide the T-bar away from the release cable.
1. Detach the cable ball-end from the T-bar.

4. Remove the components in the order indicated in the following illustration(s) and table(s).

5. To install, reverse the removal procedure.

Carry out a parking brake cable Emergency Release test using worldwide diagostic system (WDS).

Installation Details

Ford Workshop Service and Repair Manuals