Ford Workshop Service and Repair Manuals

Universal Flange Holding Wrench

205-072 (15-030A)

Adapter for 205-072

205-072-01 (15-030A-01)

1. Remove the timing chain.
   For additional information, refer to: Timing Chain (303-01C Engine - 1.8L Duratec-HE (MI4)/2.0L Duratec-HE (MI4), In-vehicle Repair).
   

2. Remove the oil pan.
   For additional information, refer to: Oil Pan (303-01C Engine - 1.8L Duratec-HE (MI4)/2.0L Duratec-HE (MI4), In-vehicle Repair).
   

3. Remove the oil pump chain guide (if equipped).

4. Remove the oil pump chain tensioner.

5. Using the special tools, loosen the oil pump sprocket retaining bolt.

6. Remove the oil pump chain.
   1. Remove the oil pump sprocket retaining bolt.
   2. Remove the oil pump chain and the oil pump sprocket.

7. Remove the oil pump.
   • Discard the gasket.

1. 

   NOTE:Install a new oil pump gasket.
   Install the oil pump.
   • Tighten the retaining bolts in the sequence shown in two stages.
   • Stage 1: 10 Nm.
   • Stage 2: 23 Nm.

2. Install the oil pump chain.
   1. Install the oil pump chain and the oil pump sprocket.
   2. Install the oil pump sprocket retaining bolt.

3. Using the special tools, tighten the oil pump sprocket retaining bolt.

4. Install the oil pump chain tensioner.

5. Install the oil pump chain guide (if equipped).

6. Install the oil pan.
   For additional information, refer to: Oil Pan (303-01C Engine - 1.8L Duratec-HE (MI4)/2.0L Duratec-HE (MI4), In-vehicle Repair).
   

7. Install the timing chain.
   For additional information, refer to: Timing Chain (303-01C Engine - 1.8L Duratec-HE (MI4)/2.0L Duratec-HE (MI4), In-vehicle Repair).