Ford Workshop Service and Repair Manuals > C-MAX 2003.75 (06.2003-) > Mechanical Repairs | 5 Body and Paint | 501 Body and Paint | 501-11 Glass, Frames and Mechanisms | Diagnosis and Testing | General Procedures | Removal and Installation | Front Door Window Regulator Motor - Vehicles With: Front and Rear Power Windows

Glass, Frames and Mechanisms - Front Door Window Regulator Motor—Vehicles With: Front and Rear Power Windows

C-MAX 2003.75 (06/2003-)

Removal and Installation

Remove the front door trim panel. For additional information, refer to Section 501-05 Interior Trim and Ornamentation.

2. Remove the components in the order indicated in the following illustration(s) and table(s).

Window regulator motor

3. To install, reverse the removal procedure.

NOTE:This step should only be carried out if installing a new window regulator motor.

Configure the window regulator motor control module using WDS.

Initialize the door window motors.
For additional information, refer to Door Window Motor Initialization - in this section.

Removal Details

Ford Workshop Service and Repair Manuals