Contour L4-122 2.0L CNG DOHC VIN Z SFI (1996)
Compact Disc Player (CD): Service and Repair
1. Record preset stations, then disconnect battery ground cable.
Fig. 7 Radio chassis removal
2. Install radio removing tool T87P-19061-A, or equivalent, into radio chassis, then push tools in approximately 1 inch to release retaining clips.
CAUTION: Do not use excessive force when installing radio removing tool to avoid damaging retaining clips. Damaging clips will make
removing radio chassis difficult and may cause damage. Apply light spreading force on tools and pull radio chassis out of instrument panel.
3. Disconnect wiring connectors and antenna cable.
4. Reverse procedure to install. Check radio chassis operation, then reset radio station presets.
