Contour L4-122 2.0L CNG DOHC VIN Z SFI (1996)
Fig. 20 Camshaft replacement
6. Remove intake and exhaust camshaft and camshaft front seals from cylinder head.
7. Inspect camshafts and cylinder head for wear or damage. Replace components as required.
INSTALLATION
1. Ensure crankshaft is at Top Dead Center (TDC) No. 1 cylinder.
2. Lubricate camshafts with engine assembly lubricant D9AZ-19579-D, or equivalent.
3. Install camshafts into cylinder head. Camshafts are marked for identification. Intake camshaft also has additional cam lobe for camshaft position