Contour L4-122 2.0L CNG DOHC VIN Z SFI (1996)
13. Remove two screws retaining ram air intake duct to A/C evaporator housing. Release three retaining clips and remove ram air intake duct from
A/C evaporator housing.
14. Remove screw securing A/C vacuum reservoir tank and bracket to A/C evaporator housing.
15. Disconnect two vacuum hoses from A/C vacuum reservoir tank and bracket and remove A/C vacuum reservoir tank and bracket from A/C
evaporator housing.
16. Remove two screws module bracket from heater outlet floor duct.
17. Remove screw retaining air transfer duct to heater outlet floor duct. Push transfer duct up inside of heater cutlet floor duct. Remove three screws
securing heater outlet floor duct to heater core cover using No. 20 Torx(r) socket. Release a retaining tab on each side of heater outlet floor duct
and remove heater outlet floor duct from heater core cover.