Contour L4-122 2.0L CNG DOHC VIN Z SFI (1996)
Evaporator Core: Service and Repair
NOTE:
-
Whenever an A/C evaporator core is replaced, it will be necessary to replace the suction accumulator/drier.
-
Before an A/C evaporator core is replaced, it must be leak-tested in the vehicle to verify that it is leaking.
REMOVAL
1. Remove A/C evaporator housing.
2. Remove A/C recirculating air duct.
3. Remove heater dash panel seal and evaporator retaining nut.
4. Remove two screws from rear of A/C evaporator housing.
5. Remove four screws from front of A/C evaporator housing.
6. Separate A/C evaporator housing and remove A/C evaporator core.
INSTALLATION
1. To install, reverse removal procedure.
