Contour L4-122 2.0L CNG DOHC VIN Z SFI (1996)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
1. Remove air cleaner intake resonators.
2. Remove engine air cleaner.
3. Remove power distribution box retaining screw and position power distribution box to access engine air cleaner inlet duct and tube retainer bolts.
4. Remove retainer bolts and engine air cleaner intake tube and duct from LH front fender apron.
5. To install, reverse removal procedure. Tighten engine air cleaner inlet duct and tube retainer bolts to 5-6 Nm (45-53 lb in). Tighten power
distribution box retaining screw securely.
