Contour L4-122 2.0L CNG DOHC VIN Z SFI (1996)
8.
Disconnect Throttle Position (TP) sensor electrical connector. Refer to Figure 23.
9.
Remove throttle body retaining bolts, then position throttle body aside. Refer to Figure 23. Leave throttle cables attached to throttle body.
10.
Disconnect fuel injector wiring harness connectors from fuel injectors.Refer to Figure 23. Mark number four (4) fuel injector electrical connector
for assembly purposes.
11.
Disconnect fuel pressure regulator vacuum line. Refer to Figure 23.
12.
Remove breather hose from valve cover. See Figure 23.
