Contour L4-122 2.0L CNG DOHC VIN Z SFI (1996)
^
Connect P120 to J120 at the tank valve solenoid. If Safety Recall 97S73 has been performed, the connector ends will be taped to ribbed vent
hoses.See Figure 41.
^
NOTE:
The CNG fuel tank must be completely full to perform the following steps.
^
Turn off engine, switch selector to GFI position.
^
Open quarter turn valve in CNG system.
^
Start engine. Verify that the green GFI light remains illuminated.
^
Raise vehicle.
^
Leak test all connections from the intake manifold to the CNG tank, including compuvalve, regulator, filter, quarter turn valve and all fittings
using Snoop or a mild soap and water solution.