Contour L4-122 2.0L CNG DOHC VIN Z SFI (1996)
^
With ignition key in Off position, connect connector J/P26.
44.
Attached to the VCL connector is another wiring harness with diagnostic connector J108 on the end.
^
Using cable N1-124, insert one end of the cable into the diagnostic connector J108. See Figure 37.
^
Insert the other end of the cable into the RS-232 port of the NGS tester.
^
Insert the power cable of the NGS tester into the vehicle222s cigar lighter.
^
Then with key On, Engine Oft (KOEO) read the NGS tester.
^
The NGS tester will display:
^
Using the selector knob on the NGS tester, select "Recalibration".
^
Press the trigger button on the NGS tester.