Contour L4-122 2.0L DOHC VIN 3 SFI (1995)
NOTE:
On dual cooling fan applications, you will always either install two (2) electronic fuses or replace BOTH motors and blades. Never install only one
(1) electronic fuse or replace only one (1) motor and blade.
When ordering fan and blades for dual cooling fan applications, only one kit will be required per vehicle.
Cooling Fan Motor Information - Supplement
COOLING FAN MOTOR IDENTIFICATION
1.
Identify the cooling fan motor design. One style motor has 9 round holes in the motor end cap. The other motor has a number of stamped slots
which protrude from the motor end cap. See Figure 2.
