Contour L4-122 2.0L DOHC VIN 3 SFI (1995)
Install the valve cover with a new gasket and a new solenoid valve oil seal.
1
Install in the 10 bolts.
2
Connect the crankcase ventilation hose.
3
Connect the HT wires to the spark plugs.
28. Install the appearance cover.
1
Install the eight bolts.
2
Connect the solenoid valve electrical connector and press in the rubber seal.
29. NOTE: Check the seating of the upper part of the engine front cover gasket and correct as necessary.
Install the bolts.
30. Connect the throttle cable.