Contour L4-122 2.0L DOHC VIN 3 SFI (1995)
1
Hook the cable in place.
2
Install the cable in the bracket and slide on the plastic clip.
31. Connect the speed control cable.
1
Press the retaining bushing into the bracket.
NOTE: An audible click indicates that it has snapped into place.
2
Slide the cable into the retaining bushing.
3
Connect the cable to the throttle valve.
32. Install the air cleaner resonator and air cleaner outlet tube.
1
Position the resonator and outlet. tube and secure.
2
Install the one bolt and two nuts.
3
Connect the IAT sensor electrical connector.
4
Connect the MAF electrical connector.
33. NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its
adaptive strategy. The vehicle may need to be driven 16 Km (10 miles) or more to relearn the strategy.
Connect the battery ground cable.
34. Check the fluid levels and correct as necessary.
35. Check the routing of the vacuum hoses and wiring and secure them with cable ties.
