Contour L4-122 2.0L DOHC VIN 3 SFI (1995)
Engine Mount: Specifications
Engine Support Insulator To Front Subframe Bolts [1] ........................................................................................................................................ 30-40 ft lb
Lefthand Front Engine Support Bolts [2] ............................................................................................................................................................ 75-102 ft lb
Righthand Front Engine Support Insulator Through Bolt [3] .............................................................................................................................. 75-102 ft lb
Front Subframe Through Bolts ................................................................................................................................................................................... 20 ft lb
Engine And Transaxle Support Insulator Nuts [4] ................................................................................................................................................ 52-70 ft lb
[1] Install the lefthand front engine support insulator to the front subframe with two bolts, then torque the bolts to 7 ft lb. Observe insulator to ensure
perfect front-to-rear alignment, then torque the bolts to 30-40 ft lb.
[2] Torque bolts to 7 ft lb. Observe lefthand front engine support insulator to ensure perfect front-to-rear alignment, then torque bolts to 75-102 ft lb.
[3] Torque righthand front engine support insulator bolts to front subframe to 7 ft lb. Observe position of righthand front engine support insulator.
Insulator must be centered in transaxle bracket and in perfect front-to-rear alignment. Then torque the righthand front engine support insulator through
bolt to 75-102 ft lb.
[4] Install new engine and transaxle support insulator nuts. Torque nuts to 7 ft lb. Remove engine support, then torque engine and transaxle support
insulator nuts to 52-70 ft lb.
