Contour L4-122 2.0L DOHC VIN 3 SFI (1995)
A/C-Heater Control Assembly: Service and Repair
Switch Knobs
REMOVAL
1. To remove any of the three control knobs on the heater control, grasp and pull rearward.
NOTE: Do not pry the knob off its shaft. Damage to the surface of the air conditioner control assembly bezel may result.
2. If the D-shaped spring clip which sits inside the back end of the knob remains on shaft when knob is pulled off, remove it with needlenose pliers
and install on knob.
INSTALLATION
1. To install knob, align its keyed surface with mating surface on shaft.
2. Press knob until fully seated in heater control.