Contour L4-122 2.0L DOHC VIN 3 SFI (1995)
REMOVAL
1. Working under instrument panel, disconnect LH courtesy lamp from instrument panel steering column cover.
2. Remove five screws retaining instrument panel steering column cover to instrument panel. Remove instrument panel steering column cover.
3. Disconnect vacuum hose harness from vacuum control motor.
4. Loosen two nuts retaining vacuum control motor to A/C evaporator housing.
5. Disconnect vacuum control motor from heater air outlet control lever and remove vacuum control motor.
INSTALLATION
1. To install, reverse Removal procedures.
