Contour L4-122 2.0L DOHC VIN 3 SFI (1995)
23.
Lubricate the # 1 thrust bearing with petroleum jelly and install on the pump support. Refer to Figure 18.
24.
Lubricate the pump support seals and the pump bore in the case.
25.
Install the pump removal bolts (T94P-77000-G) and lower the pump assembly into the case. Refer to Figure 19.
26.
Install the nine (9) pump mounting bolts and torque to 13 N-m (10 lb.ft.) in the sequence shown in Figure 20.
