Contour L4-122 2.0L DOHC VIN 3 SFI (1995)
6.
Remove the TSS sensor mounting bolt using an 8 mm socket and separate the TSS sensor from the pump. Refer to Figure 5.
7.
Remove the nine (9) pump mounting bolts using an 8 mm socket. Refer to Figure 6.
8.
Install a slide hammer adapter (T81P-78103-A) on the pump using two (2) pump removal bolts (T94P-77000-G).
9.
Install the impact slide hammer (T50T-100-A) on the adapter.