Contour V6-153 2.5L DOHC (1996)
Parts will not be direct shipped for this recall. Order your parts requirements through normal order processing channels as noted below:
Stock Orders
Effective immediately
Normal order process
Interim Orders
Effective immediately
Normal order process
Emergency Orders
First 30 days after launch
Call 1-800-325-5621
Emergency Orders
31 days after launch
Normal order process
Dealers will need to call 1-800-325-5621 for emergency orders for 30 days after campaign launch.
DOR/COR NUMBER
DOR/COR for this program is 50250. This number identifies parts ordered for this campaign through the Special Service Support Center
(1-800-325-5621).
DEALER PRICE
For latest prices, check or call your:
^
DOES II
^
Updated Price Book
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
Attachment III - Technical Information
HEATER BLOWER SWITCH AND CONNECTOR REPLACEMENT
OVERVIEW
When performing this service procedure, you will:
^
replace the existing blower switch wire harness connector with a redesigned connector
^
replace the existing blower switch
^
verify the repair
SERVICE PROCEDURE
1.
CAUTION:
Do not use excessive force when installing the Radio Removing Tool. This may damage the retaining clips, making radio chassis removal difficult.
Remove the radio.
^
Record the radio stations.
^
Install the Radio Removing Tool T87P-19061-A into the radio face plate.
^
Push the tool in approximately 25.4 mm (1 inch) to release the retaining clips.
^
Apply a slight spreading force on the tool and pull the radio out.
^
Disconnect the radio connectors.
