Contour V6-153 2.5L DOHC (1996)
CALIBRATION:
Refer to the Calibration Identification Charts for affected calibrations. The calibrations listed are current calibrations Past calibrations for the listed
vehicles are also included.
WARNING:
THIS MODIFICATION IS AUTHORIZED ONLY FOR THE LISTED ENGINE. PERFORMING THIS MODIFICATION ON OTHER ENGINE
CALIBRATIONS IS UNAUTHORIZED AND COULD CREATE LIABILITY UNDER APPLICABLE FEDERAL OR LOCAL LAWS.
ISSUE:
The Malfunction Indicator Lamp (MIL) may illuminate and Diagnostic Trouble Codes (DTCs) P0300, P0301, P0302, P0303, P0304, P0305, P0306,
P0307, and/or P0308 may be stored in memory with no driveability concerns present.
ACTION:
Reprogram the Powertrain Control Module (PCM) using the Service Bay Diagnostic System (SBDS) or New Generation Star (NGS) Tester. Refer to the
following Service Procedure for details.
SERVICE PROCEDURE
1.
For all MIL On concerns, conduct normal diagnostics and repair as required.
2.
Check to verify vehicle does not have the latest calibration. If it does not, reprogram the PCM with the appropriate calibration, referring to the
following Calibration Identification Chart using the April 1997 or later CD-ROM.